lemon-mirror:
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry Control Module >> Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Remove the screw, disconnect the connector and remove the keyless entry control module.
    Fig 1: Locating Keyless Entry Control Module Screws
    G05022830
· About lemon-mirror