lemon-mirror:
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Compulsory Valve Operation Check Mode >> Operation

Compulsory Valve Operation Check Mode: Operation

  1. Prepare the Subaru Select Monitor kit. < Ref. to PREPARATION TOOL , General Description. >
    Fig 1: Identifying Subaru Select Monitor Kit
    G04998013
  2. Connect the diagnosis cable to Subaru Select Monitor.
  3. Insert the cartridge to Subaru Select Monitor. < Ref. to PREPARATION TOOL , General Description. >
    Fig 2: Inserting Cartridge Into Subaru Select Monitor
    G04998014
  4. Connect the test mode connector (A) located under the glove box.
    Fig 3: Connecting Test Mode Connector
    G05017509
  5. Connect the Subaru Select Monitor to data link connector located in the lower portion of the instrument panel (on the driver's side).
    Fig 4: Locating Data Link Connector Location
    G05017015
    CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool.
  6. Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
    Fig 5: Identifying Subaru Select Monitor Switch
    G05017519
  7. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  8. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  9. Press the [YES] key after the information of engine type has been displayed.
  10. On the «Engine Diagnosis» display screen, select the {System Operation Check Mode} and press the [YES] key.
  11. On the «System Operation Check Mode» display screen, select the {Actuator ON/OFF Operation} and press the [YES] key.
  12. Select the desired compulsory actuator on the «Actuator ON/OFF Operation» display screen and press the [YES] key.
  13. Pressing the [NO] key completes the compulsory operation check mode. The display will then return to the «Actuator ON/OFF Operation» screen.

A list of the support data is shown in the following table.

SUPPORT DATA

Contents Display
Compulsory fuel pump relay operation check Fuel Pump
Compulsory radiator fan relay operation check Radiator Fan Relay
Compulsory air conditioning relay operation check A/C Compressor Relay
Compulsory purge control solenoid valve operation check CPC Solenoid
Compulsory pressure control solenoid valve operation check PCV Solenoid Valve
Compulsory drain valve operation check Vent Control Solenoid Valve
NOTE:
  • The following parts will be displayed but not functional.
    EGR SOLENOID VALVE CHART

    Display
    EGR Solenoid Valve
    AAI Solenoid
    ASV Solenoid Valve
    FICD Solenoid
    Pressure Switching Sol. 1
    Pressure Switching Sol. 2
    Turbocharger Wastegate Solenoid
    Exhaust Bypass Valve Control Permit Flag
    Fuel Tank Sensor Control Valve
    Secondary Air Combination Valve 1
  • For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".