lemon-mirror:
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 4AT >> Extension Case >> Assembly

Extension Case: Assembly

  1. Press-fit the new oil seal using ST and the press.

    ST 498057300 INSTALLER

  2. Press-fit the dust cover.
  3. Install the transfer clutch pipe to the extension case while being careful not to deform the pipe.
    Fig 1: Identifying Transfer Clutch Pipe
    G05021888Courtesy of SUBARU OF AMERICA, INC.
  4. Install the transfer clutch assembly to the case.
    NOTE:
    • Be careful not to damage the seal ring.
    • Press-fit the clutch assembly to the bottom of the bearing shoulder completely.
      Fig 2: Identifying Transfer Clutch Assembly
      G05021889Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror