lemon-mirror:
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Injector >> Removal >> RH Side

RH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , Procedure, Fuel .>
  3. Disconnect the ground cable from the battery.
  4. Open the fuel filler flap lid, and remove the fuel filler cap.
  5. Remove the air cleaner case. <Ref. to REMOVAL , Air Cleaner Case .>
  6. Remove the fuel pipe protector RH.
    Fig 1: Identifying Fuel Pipe Protector RH Bolts
    G05018455Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from fuel injector.
    Fig 2: Identifying Fuel Injector Connector
    G05018456Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the engine harness from the fuel injector pipe RH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 3: Identifying Fuel Injector Pipe RH Bolts
    G05018411Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.
· About lemon-mirror