lemon-mirror:
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Intake Manifold >> Disassembly

Intake Manifold: Disassembly

  1. Remove the engine harness from intake manifold.
  2. Remove the throttle body. <Ref. to REMOVAL , Throttle Body .>
  3. Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensors .>
  4. Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valves .>
  5. Loosen the clamp which holds fuel injector pipe to the fuel hose, and then disconnect the pipe from fuel hose.
    Fig 1: Identifying Fuel Hose
    G05018427Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bolts which install fuel pipes on intake manifold.
    Fig 2: Identifying Fuel Pipes Bolts
    G05018428Courtesy of SUBARU OF AMERICA, INC.
    Fig 3: Identifying Intake Manifold Bolts
    G05018429Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror