Remote Control Mirror Switch: Inspection
Move the remote control mirror switch to each position and check continuity between terminals.
Switch the change over switch to the right side:
SWITCH POSITION TERMINAL REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | 1 MΩ or more |
| UP | 8 and 3, 6 and 7 | Less than 1 Ω |
| DOWN | 8 and 6, 3 and 7 | Less than 1 Ω |
| LEFT | 8 and 2, 6 and 7 | Less than 1 Ω |
| RIGHT | 8 and 6, 2 and 7 | Less than 1 Ω |
Switch the change over switch to the left side:
SWITCH POSITION TERMINAL REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | 1 MΩ or more |
| UP | 8 and 4, 6 and 7 | Less than 1 Ω |
| DOWN | 8 and 6, 4 and 7 | Less than 1 Ω |
| LEFT | 8 and 5, 6 and 7 | Less than 1 Ω |
| RIGHT | 8 and 6, 5 and 7 | Less than 1 Ω |
If NG, replace the switch.