Fuel Sub Level Sensor: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION: Be careful not to spill fuel.

Set the vehicle on a lift.
Disconnect the ground cable from the battery.

Fig 1: Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Drain fuel from fuel tank. <Ref. to DRAINING FUEL , PROCEDURE, FUEL .>
Remove the trunk room mat. (Sedan model)
Remove the luggage floor mat. (Wagon model) <Ref. to REMOVAL , Luggage Floor Mat .>
Remove the service hole cover.

Fig 2: Identifying Service Hole Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the fuel sub level sensor.
Disconnect the fuel jet pump hose.

Fig 3: Identifying Fuel Jet Pump Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fuel sub level sensor on fuel tank.

Fig 4: Identifying Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel sub level sensor.

Fig 5: Removing Fuel Sub Level Sensor

Courtesy of SUBARU OF AMERICA, INC.