Intake Manifold: Disassembly
- Disconnect the engine ground terminal from the intake manifold.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the ignition coil and ignitor assembly. <Ref. to
REMOVAL
, Ignition Coil and Ignitor Assembly .>
- Remove the throttle body. <Ref. to
REMOVAL , Throttle Body .>
- Remove the EGR valve. <Ref. to
REMOVAL , EGR Valve .>
- Remove the PCV pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe protector LH.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe protector RH.
Courtesy of SUBARU OF AMERICA, INC.
- Disconnect the connectors (A) from fuel injector.
- Remove the harness band (B) which holds the engine harness to the fuel injector pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the purge control solenoid valve. <Ref. to
REMOVAL
, Purge Control Solenoid Valve .>
- Remove the harness band clips which install the engine harness.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the bolts which hold engine harness to the intake manifold.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the engine harness from the intake manifold.
- Remove the bolts which hold the fuel injector pipe to the intake manifold, as shown in the figure.
- RH side
Courtesy of SUBARU OF AMERICA, INC.
- LH side
Courtesy of SUBARU OF AMERICA, INC.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel injector from fuel injector pipe.
- Disconnect the quick connector that fastens the fuel injector pipe RH to the fuel pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Disconnect the quick connector that fastens the fuel injector pipe LH to the fuel pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel injector pipe RH and LH.
- Remove the bolts which install fuel pipe assembly on intake manifold.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe assembly from intake manifold.