lemon-mirror:
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T Control Systems >> Select Lever >> Removal

Select Lever: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from the battery.
  3. Set the select lever to "N" range.
  4. Lift up the vehicle.
  5. Remove the rear exhaust pipe and muffler.
    • SOHC model

      <Ref. to REMOVAL , Rear Exhaust Pipe .> <Ref. to REMOVAL , Muffler .>

    • DOHC Turbo model

      <Ref. to REMOVAL , Rear Exhaust Pipe .> <Ref. to REMOVAL , Muffler .>

  6. Disconnect the cable from select lever and then remove the cable bracket.
    Fig 1: Identifying Adjusting Nut And Cable Bracket
    G05002286Courtesy of SUBARU OF AMERICA, INC.
  7. Lower the lift.
  8. Remove the console box. <Ref. to REMOVAL , Console Box .>
  9. Disconnect the connectors, and then remove the four bolts to take out the select lever from vehicle body.
    10. Fig 2: Locating Select Lever Assembly Bolts
    G05002287Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror