lemon-mirror:
Home >> Subaru >> 2007 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Clutch System >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

  1. Remove the straight pin and reservoir tank.
    Fig 1: Identifying Straight Pin And Reservoir Tank
    G05342768Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
    Fig 2: Identifying Oil Seal And Master Cylinder
    G05342769Courtesy of SUBARU OF AMERICA, INC.
  3. Move the cylinder boot towards the rear.
    Fig 3: Moving Cylinder Boot Backwards
    G05342770Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the snap ring.
    CAUTION: Be careful when removing the snap ring, to prevent the rod, washer, piston and return spring from flying out.
  5. Remove the clutch damper.
· About lemon-mirror