Data Link Connector: Note

This connector is used for the general scan tool and the Subaru Select Monitor.

CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.

Fig 1: Identifying Data Link Connectors

Courtesy of SUBARU OF AMERICA, INC.

CONNECTORS TERMINAL REFERENCE CHART

Terminal No.	Content	Terminal No.	Content
1	Empty	9	Empty
2	Empty	10	Empty
3	Empty	11	Empty
4	Ground	12	Empty
5	Ground	13	Empty
6	CAN (+)	14	CAN (-)
7	Subaru select monitor/General scan tool signal	15	Empty
8	Empty	16	Power supply