lemon-mirror:
Home >> Subaru >> 2008 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4SO) >> Engine Control Module (ECM) >> Removal

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the lower inner trim of passenger's side.

    <Ref. to REMOVAL , Lower Inner Trim.>

  3. Detach the floor mat of passenger's seat.
  4. Remove the protect cover.
    Fig 2: Locating Protect Cover Bolts
    G05659489Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the bolts and nuts which hold the ECM to the bracket.
    Fig 3: Locating ECM Bracket Bolts And Nuts
    G05659490Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the ECM connectors, and take out the ECM.
· About lemon-mirror