Fuel Sub Level Sensor: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:

Be careful not to spill fuel.
When the fuel meter indication is higher than two third of the total, perform the work after draining the fuel not to spill the fuel.

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Drain fuel. <Ref. to DRAINING FUEL (WITH SUBARU SELECT MONITOR) , PROCEDURE, Fuel. >
Disconnect the ground cable from the battery.

Fig 1: Identifying Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the rear seat.
Remove the service hole cover.

Fig 2: Identifying Service Hole Cover And Fuel Sub Level Sensor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the fuel sub level sensor.

Fig 3: Identifying Fuel Sub Level Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the quick connector, then disconnect the fuel delivery tube, fuel return tube, and jet pump tube. <Ref. to REMOVAL , Fuel Delivery, Return and Evaporation Lines. >
Remove the nuts and bolts which install fuel sub level sensor on fuel tank.

Fig 4: Identifying Fuel Sub Level Sensor And Fuel Tank
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel sub level sensor.