lemon-mirror:
Home >> Subaru >> 2008 >> Legacy R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
  4. Remove the service hole cover.
    Fig 2: Locating Service Hole Cover
    G05018438Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the crankshaft position sensor.
    Fig 3: Locating Crankshaft Position Sensor
    G05018439Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector from crankshaft position sensor.
· About lemon-mirror