lemon-mirror:
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Entertainment System) >> Navigation Display >> Removal

Navigation Display: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the clip, and remove the center upper panel.
    Fig 1: Locating Center Upper Panel Clip
    G05022576Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the display mounting screws.
    Fig 2: Locating Display Mounting Screws
    G05022577Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the harness connector and remove the navigation display.