Check Speed Sensor

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before starting inspections, inspect the safety around the vehicle.
Lift-up the vehicle as necessary.
When the diagnostic trouble code is input in the VDCCM, perform the Clear Memory operation.

Move the vehicle 2 to 3 meters (6.6 to 9.8 ft).
Check that the numbers from the speed sensor are displayed.

Standard value: Vehicle speed is to be shown in numbers.

OK: Normal

NG: If vehicle speed is not displayed, check the signal line connection. If there are no problems, the unit could be faulty.