lemon-mirror:
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Glass/Windows/Mirrors) >> Power Window Control Switch >> Inspection >> Main Switch

Main Switch

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure the switch resistance.

Fig 1: Identifying Main Switch Connector Terminal
G05022599Courtesy of SUBARU OF AMERICA, INC.
RESISTANCE SPECIFICATION CHART

  Switch position Terminal No. Standard
Driver's side UP 10 and 2, 7 and 1 Less than 1 Ω
OFF 2 and 7, 1 and 2 Less than 1 Ω
DOWN 10 and 1, 7 and 2 Less than 1 Ω
AUTO DOWN 10 and 1, 7 and 2 Less than 1 Ω
RESISTANCE SPECIFICATION CHART

  Switch position Terminal No. Standard
Passenger's side UP 10 and 14, 7 and 11 Less than 1 Ω
OFF 7 and 14, 7 and 11 Less than 1 Ω
DOWN 10 and 11, 7 and 14 Less than 1 Ω
RESISTANCE SPECIFICATION CHART

  Switch position Terminal No. Standard
Rear RH seat UP 10 and 13, 7 and 12 Less than 1 Ω
OFF 7 and 13, 7 and 12 Less than 1 Ω
DOWN 10 and 12, 7 and 13 Less than 1 Ω
RESISTANCE SPECIFICATION CHART

  Switch position Terminal No. Standard
Rear LH seat UP 10 and 8, 7 and 9 Less than 1 Ω
OFF 7 and 8, 7 and 9 Less than 1 Ω
DOWN 9 and 10, 7 and 8 Less than 1 Ω

Replace the main switch if faulty.