lemon-mirror:
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Glass/Windows/Mirrors) >> Power Window Control Switch >> Removal >> Sub-Switch

Power Window Control Switch: Removal: Sub-Switch

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the door trim. < Ref. to REMOVAL , Door Trim. >
  3. Disconnect the connector.
  4. Remove the screws from the reverse side of door trim to remove the power window sub-switch.
    Fig 1: Locating Power Window Sub-Switch Screws
    G05022598Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror