Power Window Control Switch: Inspection: Sub-Switch
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the sub-switch. <Ref. to SUB-SWITCH , REMOVAL, Power Window Control Switch. >
- Measure the sub-switch resistance.
CONNECTOR TERMINALS SPECIFICATIONS
| Switch position | Terminal No. | Standard | |
|---|---|---|---|
| Passenger seat, rear | UP | 4 and 5 6 and 7 |
Less than 1 Ω |
| OFF | 7 and 4 8 and 4 |
1 MΩ or more | |
| 5 and 8 6 and 7 |
Less than 1 Ω | ||
| DOWN | 4 and 6 5 and 8 |
Less than 1 Ω |
Replace the sub-switch if faulty.