Main Switch

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.
Open the screw cover by using a flat tip screwdriver.
Remove the screw to remove the power window main switch panel.

Fig 1: Identifying Power Window Main Switch Panel
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Remove it from the cutout portion at the tip of the switch panel.

Fig 2: Identifying Cutout Portion
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector.
Remove the screw to remove the power window main switch assembly.