Remote Control Mirror Switch: Inspection
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Move the remote control mirror switch to each position and check continuity between terminals.
- Switch the change over switch to the right side:REMOTE CONTROL MIRROR SWITCH CONNECTOR TERMINALS SPECIFICATIONS
Switch position Terminal No. Standard OFF - 1 MΩ or more UP 8 and 3, 6 and 7 Less than 1 Ω DOWN 8 and 6, 3 and 7 Less than 1 Ω LEFT 8 and 2, 6 and 7 Less than 1 Ω RIGHT 8 and 6, 2 and 7 Less than 1 Ω - Switch the change over switch to the left side:
CONNECTOR TERMINALS SPECIFICATIONS
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | 1 MΩ or more |
| UP | 8 and 4, 6 and 7 | Less than 1 Ω |
| DOWN | 8 and 6, 4 and 7 | Less than 1 Ω |
| LEFT | 8 and 5, 6 and 7 | Less than 1 Ω |
| RIGHT | 8 and 6, 5 and 7 | Less than 1 Ω |
If NG, replace the switch.