Front Axle: Assembly

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the front hub unit bearing. <Ref. to ASSEMBLY , Front Hub Unit Bearing .>
Place the disc cover between housing and front hub unit, and tighten the four bolts.
Tightening torque:

65 N.m (6.6 kgf-m, 47.9 ft-lb)

Fig 1: Locating Housing Bolts
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Do not get closer the tool which charged magnetism to magnetic encoder.
- Be careful not to damage the magnetic encoder.
  
  Fig 2: Identifying Magnetic Encoder And Front Hub Unit Bearing
  Courtesy of SUBARU OF AMERICA, INC.