H4 Model

1. Place the oil pump bracket in a vise. Tighten the bushing using a 12.7 mm (1/2") type, 14 and 21 mm box wrench until it is in contact with the oil pump mounting surface.
   CAUTION: When securing the oil pump bracket in a vice, hold the oil pump bracket with the least possible force between two pieces of wood.
   Fig 1: Identifying Bushing, Nut And Bolt

   Courtesy of SUBARU OF AMERICA, INC.
2. Tighten the bolts which hold the oil pump to the bracket.

   Tightening torque: 

   15.7 N.m (1.6 kgf-m, 11.6 ft-lb) 

   Fig 2: Locating Oil Pump Bracket Bolts

   Courtesy of SUBARU OF AMERICA, INC.

   Tightening torque: 

   37.3 N.m (3.8 kgf-m, 27.5 ft-lb) 

   Fig 3: Locating Oil Pump Bracket Bolt

   Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

<Ref. to  OIL PUMP  , COMPONENT, General Description.> 

Fig 4: Locating Power Steering Pump Bracket Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

Eye bolt 

40 N.m (4.1 kgf-m, 29.5 ft-lb) 

• Non-turbo model
  Fig 5: Identifying Pressure Hose And Suction Hose (Non-Turbo Model)

  Courtesy of SUBARU OF AMERICA, INC.
• Turbo model
  Fig 6: Identifying Pressure Hose And Suction Hose (Turbo Model)

  Courtesy of SUBARU OF AMERICA, INC.

<Ref. to INSPECTION , V-belt.>

Tightening torque: 

25 N.m (2.5 kgf-m, 18.4 ft-lb)