lemon-mirror:
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Entertainment System) >> Audio >> Inspection >> Notes

Section 122 (Entertainment System): Audio: Inspection: Notes

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Audio Switches
G05344021Courtesy of SUBARU OF AMERICA, INC.
NOTE:
  • For self diagnosis of the audio system, there is a communications check (communication condition between the audio and the control panel) and a switch check. Perform a communications check first and make sure it is operating normally before proceeding to the inspection of switches.
  • Complete operations from when the self diagnosis mode of step 1 operates and the buzzer sounds, to pressing the preset 1 switch in 3., within 15 seconds. If 15 seconds or more pass, a communications error will be displayed.
  • During the diagnosis, do not press the POWER (8), FM/AM (12), CD (11), AUX (13), SAT (18) switches. Pressing these switches will disengage the self diagnosis mode. For the AUX switch, the self diagnosis mode will be disengaged if the switch is connected.