Clutch System: Flywheel: Installation

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel mounting bolts to the specified torque.
ST 499057000 TORX® PLUS (Used for 5MT turbo model)

CAUTION: The bolts without identification groove as shown in the figure must be used as flywheel attaching bolts for 5MT turbo model.

Fig 2: Identifying Flywheel Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque:

5MT model

72 N.m (7.3 kgf-m, 52.8 ft-lb)

6MT model

81 N.m (8.2 kgf-m, 59.4 ft-lb)

Fig 3: Identifying Tightening Sequence Of Flywheel Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. < Ref. to INSTALLATION , Clutch Disc and Cover . >
Install the transmission assembly. < Ref. to INSTALLATION - 5MT , Manual Transmission Assembly . > < Ref. to INSTALLATION - 6MT , Manual Transmission Assembly . >