Operating Cylinder: Assembly

Recommended brake fluid 

FMVSS No. 116, fresh DOT3 or 4 brake fluid 

1. Install the piston spring to the piston.
   NOTE:

   • Only 5MT model can be assembled.
   • The illustration below is for a Non-turbo model.
     Fig 1: Identifying Piston And Piston Spring

     Courtesy of SUBARU OF AMERICA, INC.
2. Insert piston to the operating cylinder.
3. Install push rod to the boot.
4. Install boot and push rod to the operating cylinder.
   NOTE: The illustration below is for a Non-turbo model.
   Fig 2: Identifying Boots And Push Rod Assembly

   Courtesy of SUBARU OF AMERICA, INC.