Operating Cylinder: Disassembly

Remove the boots and push rod assembly.
NOTE:
- Only 5MT model can be disassembled.
- The illustration below is for a Non-turbo model.
  
  Fig 1: Identifying Boots And Push Rod Assembly
  Courtesy of SUBARU OF AMERICA, INC.
Apply compressed air through clutch hose attaching port.
NOTE: Face the piston port down and place a piece of wood underneath to prevent the piston from popping out.

Fig 2: Identifying Clutch Hose
Courtesy of SUBARU OF AMERICA, INC.
Separate the piston and piston spring.
NOTE: The illustration below is for a Non-turbo model.

Fig 3: Identifying Piston And Piston Spring
Courtesy of SUBARU OF AMERICA, INC.