Operating Cylinder: Removal

Remove the air intake chamber. (Non-turbo model) < Ref. to REMOVAL . >
Remove the intercooler. (Turbo model) < Ref. to REMOVAL . >
Disconnect the clutch hose from the operating cylinder.
CAUTION:
- Cover the hose joint to prevent the clutch fluid from flowing out.
- Do not loosen or remove the cap bolts. (5MT turbo model)
- 5MT model
  NOTE: The illustration below is for a Non-turbo model. However, perform the same procedures for the Turbo model.
  
  Fig 1: Identifying Clutch Hose And Operating Cylinder (5MT Model)
  Courtesy of SUBARU OF AMERICA, INC.
- 6MT model
  
  Fig 2: Identifying Clutch Hose And Operating Cylinder (6MT Model)
  Courtesy of SUBARU OF AMERICA, INC.
Remove the operating cylinder from the transmission.
- 5MT model
  NOTE: The illustration below is for a Non-turbo model. However, perform the same procedures for the Turbo model.
  
  Fig 3: Locating Operating Cylinder Bolts (5MT Model)
  Courtesy of SUBARU OF AMERICA, INC.
- 6MT model
  
  Fig 4: Locating Operating Cylinder Bolts (6MT Model)
  Courtesy of SUBARU OF AMERICA, INC.