lemon-mirror:
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System - Ignition >> Spark Plug >> Adjustment

Spark Plug: Adjustment

Clean the spark plugs using a nylon brush or the like. Clean and remove the carbon or oxide deposits. If deposits are too stubborn, replace the spark plugs. After cleaning the spark plugs, measure the spark plug gap using a gap gauge.

NOTE:
  • Do not use a plug cleaner.
  • Never use a metal brush because it makes insulator worn.

Spark plug gap L: 

0.7 - 0.8 mm (0.028 - 0.031 in) 

Fig 1: Identifying Spark Plug Gap
G04992917Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror