lemon-mirror:
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Sub Frame >> Installation

Rear Sub Frame: Installation

NOTE:
  • Be sure to use a new self-locking nut.
  • Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
  1. Install in the reverse order of removal.

    Tightening torque: Refer to "COMPONENT" of "General Description" for the tightening torque.  < Ref. to COMPONENT , General Description . >

  2. Bleed air from brake system.
  3. Inspect the wheel alignment and adjust if necessary.
· About lemon-mirror