lemon-mirror:
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

  1. When installing the front differential assembly to case, be careful not to damage the inside of case (particularly, the differential side retainer mating surface).
    Fig 1: Identifying Front Differential Assembly
    G05671115Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-ring to left and right side retainer.
  3. Using the ST, install the side retainer.

    ST 18630AA010 WRENCH COMPL RETAINER

  4. Adjust the backlash of the front differential. <Ref. to ADJUSTMENT , Front Differential Assembly.>
  5. Install the lock plate.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    Fig 2: Identifying Lock Plate
    G05671116Courtesy of SUBARU OF AMERICA, INC.
  6. Install the converter case to the transmission case. <Ref. to INSTALLATION , Converter Case.>
  7. Install the transmission harness connector to the stay.
  8. Install the ATF cooler pipe. <Ref. to INSTALLATION , ATF Cooler Pipe and Hose.>
  9. Install the oil charge pipe together with an O-ring. <Ref. to INSTALLATION , Oil Charge Pipe.>
  10. Install the torque converter assembly. <Ref. to INSTALLATION , Torque Converter Assembly.>
  11. Install the transmission assembly to the vehicle. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
· About lemon-mirror