Front Stabilizer: Installation

Install in the reverse order of removal.

CAUTION:

Use a new self-locking nut.
Ensure the stabilizer bushing and stabilizer have the same identification colors.
Install the stabilizer bushing (front cross-member side) while aligning it with the paint mark on stabilizer.
The stabilizer bracket has a set orientation. Install it with the arrow mark facing the upper side of the vehicle.

Fig 1: Identifying Stabilizer Bracket

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Stabilizer link:

45 N.m (4.6 kgf-m, 33.2 it-lb)

Stabilizer bracket:

25 N.m (2.5 kgf-m, 18.4 it-lb)