lemon-mirror:
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 4AT >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Removing Taper Roller Bearing
    G05002714Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into differential case (RH) and differential case (LH).
    Fig 2: Separating Hypoid Driven Gear Into Differential Case (RH) And Differential Case (LH)
    G05956158Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the straight pin and pinion shaft, then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Pulling Straight Pin
    G05956159Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror