lemon-mirror:
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> System Operation Check Mode >> Operation >> EGR Valve Control

EGR Valve Control

CAUTION: After executing the system operation check mode, execute the Clear Memory Mode. Refer to OPERATION , Clear Memory Mode.
  1. On the «System Operation Check Mode» display screen, select the {EGR Valve Control}.
  2. On the «Start the Engine» display screen, start the engine and click the [OK] button.
  3. In the «EGR Valve Control» display screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.

    Setting is possible in increments of 1 STEP. However, the STEP number that can actually be controlled will vary depending on the vehicle.

  4. Click the [Cancel] button to stop the EGR valve control.
  5. Click the [[F12] Exit] button to end the EGR valve control. The display will then return to the «System Operation Check Mode» screen.
    NOTE: For detailed operation procedures, refer to the "SUBARU SELECT MONITOR ".
· About lemon-mirror