lemon-mirror:
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Universal Joint >> Installation

Universal Joint: Installation

  1. Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.
    Fig 1: Installation Position Of Universal Joint
    G06339518Courtesy of SUBARU OF AMERICA, INC.
  2. Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
  3. Tighten the bolts.

    Tightening torque: 

    24 N.m (2.4 kgf-m, 17.7 ft-lb) 

    CAUTION: Excessively large tightening torque of universal joint bolts may lead to heavy steering wheel operation.
  4. Align the center position of the roll connector. Refer to ADJUSTMENT , Roll Connector.
  5. Install the steering wheel. Refer to INSTALLATION , Steering Wheel.
· About lemon-mirror