Rear Stabilizer: Installation
- Install in the reverse order of removal.CAUTION:
- Be sure to use a new self-locking nut.
- Ensure the stabilizer bushing and stabilizer have the same identification colors.
- To install the stabilizer bushing, align the paint mark end of stabilizer to the end of stabilizer bushing.
- The stabilizer bracket has a set orientation. Install it with the arrow mark facing the upper side of the vehicle.
- Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
Tightening torque:
Stabilizer link
44 N.m (4.5 kgf-m, 32.5 ft-lb)
Stabilizer bracket
38 N.m (3.9 kgf-m, 28 ft-lb)