lemon-mirror:
Home >> Subaru >> 2010 >> Outback Limited >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Transmission Control Systems >> TCM Reprogramming Files (16-79-09)

TCM Reprogramming Files (16-79-09)

Publication date: 2009-09-11
Reference number: 16-79-09

TCM REPROGRAMMING FILES

TCM REPROGRAMMING FILES

TECHNICAL SERVICE BULLETIN

Reference Number(s): 16-79-09, Date of Issue:  September 11, 2009
SUBARU: 2010 MY Legacy & Outback Equipped with 3.6L, 5AT

INTRODUCTION

This is to announce that TCM reprogramming files are now available to enhance the performance of the valves within the valve body. The purpose of this enhancement is to reduce the possibility of intermittent valve sticking. The current shifting or functionally of the transmission is not affected by this enhancement. It is recommended that reprogramming be performed on all applicable vehicles to assure proper transmission operation. 

NOTE: TCM reprogramming files were sent to all SDS users, as reprogramming SSMIII Flashwrite files on Friday September 11, 2009.

Countermeasure in Production

The new pack files were used in production August 7, 2009 starting with the following VINs:

VIN LIST

MODEL BODY ENGINE VIN
Legacy Sedan 3.6L A2216310
Outback Wagon 3.6L A2319614

Pack File Applicability

PACK FILE APPLICABILITY

PACK FILE NAME PART # AFTER REPROGRAMING OLD PART # MODEL/ENGINE/TRANS
30919AA072.pak 30919AA072 30919AA070/71 Legacy; 3.6L, 5AT
30919AA082.pak 30919AA082 30919AA080/81 Outback; 3.6L, 5AT
NOTE: After the reprogramming has been successfully completed, the Transmission Learning Control does not need to be performed.

WARRANTY/CLAIM INFORMATION

WARRANTY/CLAIM INFORMATION

LABOR DESCRIPTION LABOR OPERATION # FAIL CODE LABOR TIME
TCM Reprogramming A186-738 MJZ-48 0.4