lemon-mirror:
Home >> Subaru >> 2010 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission >> Intermediate Case >> Removal

Intermediate Case: Removal

  1. Remove the transmission assembly from vehicle body. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Remove the extension case. Ref. to REMOVAL , Extension Case.
  3. Remove the rear drive shaft. Ref. to REMOVAL , Rear Drive Shaft.
  4. Remove the transfer clutch assembly. Ref. to REMOVAL , Transfer Clutch.
  5. Remove the transfer reduction driven gear assembly. Ref. to REMOVAL , Transfer Reduction Driven Gear.
  6. Remove the intermediate case.
    NOTE:
    • The total number of intermediate case mounting bolts is 14.
    • Inside the transmission is a single bolt (arrowed).
    Fig 1: Locating Single Bolt
    G06654542Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the CVTF filter.
    Fig 2: Identifying CVTF Filter
    G06654543Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the O-ring from the transmission case.
    Fig 3: Locating O-Ring
    G06654544Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror