Transmission Case: Disassembly

Remove all plugs from the transmission case.

Fig 1: Locating Plugs
Courtesy of SUBARU OF AMERICA, INC.
Remove the lubrication pipe.

Fig 2: Locating Lubrication Pipe
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil seal using a screwdriver wrapped with cloth etc.

Fig 3: Locating Oil Seal
Courtesy of SUBARU OF AMERICA, INC.
Remove the ball bearing from reduction driven gear using ST.
ST 398527700 PULLER ASSY

Fig 4: Removing Ball Bearing From Reduction Driven Gear Using ST
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring on primary pulley side.

Fig 5: Identifying Snap Ring On Primary Pulley Side
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the roller bearing on primary pulley side.
NOTE: Warm up the bearing area of transmission case using a drier or heat gun.

ST 398527700 PULLER ASSY

Fig 6: Removing Roller Bearing On Primary Pulley Side
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring on secondary pulley side.

Fig 7: Identifying Snap Ring On Secondary Pulley Side
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the roller bearing on secondary pulley side.
NOTE: Warm up the bearing area of transmission case using a drier or heat gun.

ST 398527700 PULLER ASSY

Fig 8: Removing Roller Bearing On Secondary Pulley Side
Courtesy of SUBARU OF AMERICA, INC.