lemon-mirror:
Home >> Subaru >> 2010 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
NOTE: Refer to WIRING ARTICLE for transmission harness terminal and oil temperature sensor terminal. Ref. to TRANSMISSION , WIRING DIAGRAM, CVT Control System .

Harness continuity standard 

Less than 1 Ω 

Oil temperature sensor standard 

Approx. 2.6 kΩ (at 20°C) 

· About lemon-mirror