lemon-mirror:
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Reduction Driven Gear >> Installation

Reduction Driven Gear: Installation

  1. Set the range select lever to the "P" range.
  2. Use a plastic hammer to install reduction driven gear assembly.
  3. Select the reduction gear shims. Ref. to ADJUSTMENT , Reduction Driven Gear.
  4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. Ref. to INSTALLATION , Extension Case.
  5. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
· About lemon-mirror