lemon-mirror:
Home >> Subaru >> 2011 >> Outback R Limited >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Wheel Alignment >> Inspection >> Camber

Wheel Alignment: Inspection: Camber

  1. Place the front wheel on the turning radius gauge.
    NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    Fig 1: Placing Front Wheel On Turning Radius Gauge (Camber)
    G07913929Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
    Model Camber (Difference between RH and LH 45' or less)
    P205/60R16
    P215/50R17    		 -0°30'±0°45'
    P225/50R17
    225/45R18    		 -0°15'±0°45'
    P225/60R17
    P215/70R16    		 0°00'±0°45'
· About lemon-mirror