lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Impact Sensor >> Installation

Impact Sensor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from ignition switch.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Change the impact sensor setting using the Subaru Select Monitor.
· About lemon-mirror