lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Keyless Entry Control Module >> Removal >> Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear shelf trim. Refer to REAR SHELF TRIM .
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and remove the keyless entry control module.
      Fig 1: Removing Keyless Entry Control Module (Sedan Model)
      G06653939Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror