lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Keyless Transmitter >> Inspection >> Keyless Transmitter Battery

Keyless Transmitter Battery

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the keyless transmitter battery voltage.

    Preparation tool: Circuit tester 

    NOTE: Complete the measurement within 5 seconds because the battery discharges during measurement.
    Fig 1: Checking Keyless Transmitter Battery Voltage
    G05337080Courtesy of SUBARU OF AMERICA, INC.
    Battery terminal Inspection Conditions Specification
    (+) - (-) Connect resistor (A) 47 Ω 2.5 - 3.0 V
  2. Replace the battery if the inspection result is not within the standard value. (Use CR1620 or equivalent.)
· About lemon-mirror