lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Entertainment) >> Navigation System >> Inspection >> Check Each Vehicle Signal >> Check Back Sensor

Check Back Sensor

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch {Vehicle Signal Info.} on the << Dealer Diag Menu >> screen.
  2. Pull the parking brake and depress the brake pedal, then put the gear in reverse.
  3. Make sure that "ON" is displayed in the Reverse item.

    ON: Normal.

    OFF: Abnormal. Check the signal line connection. If there are no problems, the unit could be faulty.

· About lemon-mirror