lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Entertainment) >> Navigation System >> Inspection >> Check Each Vehicle Signal >> Check Speed Sensor

Check Speed Sensor

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Before starting inspections, check the safety around the vehicle.
  • Lift up the vehicle as necessary.
  • When the diagnostic trouble code is input in the VDC CM, perform the clear memory operation.
  1. Touch {Vehicle Signal Info.} on the << Dealer Diag Menu >> screen.
  2. Move the vehicle 2 to 3 meters (6.6 to 9.8 ft).
  3. Check that "ON" is displayed in the Speed item.

ON: Normal.

OFF: Abnormal. Check the signal line connection. If there are no problems, the unit could be faulty.

· About lemon-mirror