Power Window Control Switch: Installation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- After installation of main switch, always perform the initial setting. (model with driver's side AUTO UP function)
Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.
- Use protective paper to avoid damage to the door trim.
- Install each part in the reverse order of removal.
- Perform initial setting operation (reset operation A). Refer to , RESET OPERATION A , OPERATION, Power Window System.