lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Continuously Variable Transmission) >> Transmission Control Module (TCM) >> Installation

Transmission Control Module (TCM): Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TCM to the bracket.
    CAUTION: To avoid the damage to bracket and TCM, do not remove after installing TCM to bracket. If installed by mistake, the part must be replaced with a new part.
  2. Install the TCM.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

    Fig 1: Identifying Transmission Control Module (TCM) And Bracket (View 2 Of 2)
    G06654470Courtesy of SUBARU OF AMERICA, INC.
  3. Install the harness connector to TCM.
  4. Install the instrument panel lower cover. Refer to INSTRUMENT PANEL LOWER COVER EI-64, INSTALLATION, Instrument Panel Lower Cover.
  5. Execute the learning control promotion. Refer to LEARNING CONTROL CVT(diag)-20, Learning Control.
· About lemon-mirror