lemon-mirror:
Home >> Subaru >> 2012 >> Impreza WRX STi Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (WRX-STI) >> Engine Control Module (ECM) >> Installation

Engine Control Module (ECM): Installation

Install in the reverse order of removal.

CAUTION:
  • When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to PC application for Subaru Select Monitor .)
  • When replacing the ECM or bracket, replace both parts with new parts.
  • After installing the bracket to the ECM, do not separate the bracket.
  • If the bracket has been installed to the ECM in the wrong direction, replace both parts with new parts.
  • When the ECM has been replaced, be sure to perform the registration of VIN. Refer to OPERATION .
NOTE: When replacing the ECM, be careful not to use the wrong spec. ECM to avoid any damage on the fuel injection system.

Tightening torque: 

7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

· About lemon-mirror